500kW / 1MWh Microgrid
Industrial Battery Energy Storage System
ESS-GRID FlexiO is an air-cooled industrial/commercial battery solution in the form of a split PCS and battery cabinet with 1+N scalability, combining solar photovoltaic, diesel power generation, grid and utility power. It is suitable for use in microgrids, in rural areas, in remote areas, or in large-scale manufacturing and farms, as well as for charging stations for electric vehicles.
500kW/1MWh Turnkey Commercial and Industrial Energy Storage System
The FlexiO series is a highly integrated battery energy storage system (BESS) designed to optimize performance and reduce costs for stationary commercial and industrial energy storage applications.
● Full Scenario Solutions
● Full Ecosystem Creation
● Lower Costs, Increased Reliability
Why ESS-GRID FlexiO Series?
● PV+ ENERGY STORAGE + DIESEL POWER
A hybrid energy system that combines photovoltaic power generation (DC), an energy storage system (AC / DC), and a diesel generator (which typically provides AC power).
● HIGH RELIABILITY, HIGH LIFESPAN
10-year battery warranty, advanced LFP module patented technology, cycle life up to 6000 times, intelligent temperature control program to challenge the challenge of cold and heat.
● MORE FLEXIBLE, HIGH SCALABILITY
Single battery cabinet 241kWh, expandable on demand, supports AC expansion and DC expansion.
● HIGH SECURITY, MULTI-LAYER PROTECTION
3 level fire protection architecture + BMS intelligent management center (the world's leading battery management technology, including active and passive fire protection dual integration, the product setup has a PACK level fire protection, cluster level fire protection, dual-compartment level fire protection).
● ADAPTIVE CONTROL
The system utilizes pre-set logic algorithms to manage DC coupling, effectively reducing dependence on the EMS energy management system and thus reducing overall cost of use.
● 3D VISUALIZATION TECHNOLOGY
The display provides an intuitive and interactive monitoring and control experience, as it presents the real-time status of each module in a stereoscopic three-dimensional manner.
DC-side Expansion For Longer Backup Time
5 ~ 8 ESS-BATT 241C, coverage 2-4 hours of power backup hours
AC-side Expansion Provides More Power
Easily upgradable from 500kW to 1MW of energy storage, storing up to 3.8MWh of energy, enough to power an average 3,600 homes for one hour.
| Picture | Model | ESS-GRID P500E |
 |
AC (grid-connected) | |
| PCS Rated AC Power | 500kW | |
| PCS Maximum AC Power | 550kW | |
| PCS Rated AC Current | 720A | |
| PCS Maximum AC Current | 790A | |
| PCS Rated AC Voltage | 400V，3W+PE/3W+N+PE | |
| PCS rated AC frequency | 50/60±5Hz | |
| Total harmonic distortion of current THDI | <3% (rated power) | |
| Power factor | -1 overrun ~ +1 hysteresis | |
| Voltage total harmonic distortion rate THDU | <3% (linear load) | |
| AC (off-grid load side) | ||
| Load Voltage Rating | 400Vac，3W+PE/3W+N+PE | |
| Load Voltage Frequency | 50/60Hz | |
| Overload capacity | 110% long term operation; 120% 1 minute | |
| Off-grid output THDu | ≤ 2% (linear load) | |
| DC Side |
||
| PCS DC side voltage range | 625~950V (three-phase three-wire) / 670~950V (three-phase four-wire) | |
| PCS DC side maximum current | 880A | |
| System Parameters | ||
| Protection class | IP54 | |
| Protection grade | I | |
| Isolation mode | Transformer isolation: 500kVA | |
| Self-consumption | <100W (without transformer) | |
| Display | Touch LCD touch screen | |
| Relative humidity | 0~95% (non-condensing) | |
| Noise level | Less than 78dB | |
| Ambient Temperature | -25℃~60℃ (Derating above 45℃) | |
| Cooling method | Intelligent air cooling | |
| Altitude | 2000m (over 2000m derating) | |
| BMS Communication | CAN | |
| EMS Communication | Ethernet / 485 | |
| Dimension (W*D*H) | 1450*1000*2300mm | |
| Weight (with battery approx.) | 1700kg | |
| Picture | Model | ESS-GRID P500L |
|
Photovoltaic (DC/DC) Power Rating | 500kW |
| PV (Low Voltage Side) DC Voltage Range | 312V~500V | |
| PV Maximum DC Current | 1600A | |
| Number of PV MPPT circuits | 10 | |
| Protection Rating | IP54 | |
| Protection Rating | I | |
| Display | Touch LCD touch screen | |
| Relative Humidity | 0~95% (non-condensing) | |
| Noise level | Less than 78dB | |
| Ambient Temperature | -25℃~60℃ (Derating above 45℃) | |
| Cooling Method | Intelligent air cooling | |
| EMS Communication | Ethernet / 485 | |
| Dimension (W*D*H) | 1300*1000*2300mm | |
| Weight | 500kg |
| Picture | Model number | ESS-GRID 241C |
ESS-BATT Cubincon 200kWh / 215kWh / 225kWh /241kWh |
Rated Battery Capacity | 241kWh |
| Rated System Voltage | 768V | |
| System Voltage Range | 672V~852V | |
| Cell Capacity | 314Ah | |
| Battery Type | LiFePO4 battery（LFP） | |
| Battery series-parallel connection | 1P*16S*15S | |
| Maximum charge/discharge current | 157A | |
| Protection Grade | IP54 | |
| Protection Grade | I | |
| Cooling and heating air conditioning | 3kW | |
| Noise level | Less than 78dB | |
| Cooling Method | Intelligent air-cooling | |
| BMS Communication | CAN | |
| Dimension (W*D*H) | 1150*1100*2300mm | |
| Weight (with battery approx.) | 1800kg | |
| The system uses 5 clusters of 241kWh batteries for a total of 1.205MWh | ||
