A lithium battery management system (BMS) is an electronic system designed to oversee and control the charging and discharging of individual cells within a lithium-ion battery pack and is a critical part of the battery pack. BMS is critical to maintaining battery health, safety and performance by preventing overcharging, over-discharging and managing the overall state of charge. 
The design and implementation of lithium battery BMS require a high degree of accuracy and reliability to ensure the safety, efficiency and long-lasting use of the battery. These key technologies enable BMS to monitor and manage every aspect of the battery, thereby optimizing its performance and extending its life. 1. Battery monitoring: BMS needs to monitor the voltage, current, temperature and capacity of each battery cell. This monitoring data helps to understand the status and performance of the battery. 2. Battery balancing: Each battery cell in the battery pack will cause capacity imbalance due to uneven use. The BMS needs to control the equalizer to adjust the charge state of each battery cell to ensure that they work in a similar state. 3. Charging control: BMS controls charging current and voltage to ensure that the battery does not exceed its rated value when charging, thereby extending battery life. 4. Discharge control: BMS also controls the discharge of the battery to avoid deep discharge and over-discharge, which may damage the battery. 5. Temperature Management: Battery temperature is critical to its performance and lifespan. BMS needs to monitor battery temperature and take measures if necessary, such as ventilation or reducing charging speed, to control temperature. 6. Battery protection: If the BMS detects an abnormality in the battery, such as overheating, overcharging, over-discharge or short circuit, measures will be taken to stop charging or discharging to ensure the safety of the battery. 7. Data collection and communication: BMS must collect and store battery monitoring data, and at the same time exchange data with other systems (such as hybrid inverter systems) through communication interfaces to achieve collaborative control. 8. Fault diagnosis: BMS should be able to identify battery faults and provide fault diagnosis information for timely repair and maintenance. 9. Energy efficiency: To minimize battery energy loss, BMS must effectively manage the charging and discharging process and reduce internal resistance and heat loss of the battery. 10. Predictive maintenance: BMS analyzes battery performance data and performs predictive maintenance to help detect battery problems in advance and reduce repair costs. 11. Safety: BMS should take measures to protect batteries from potential safety risks, such as overheating, short circuits and battery fires. 12. Status estimation: BMS should estimate the status of the battery based on monitoring data, including capacity, health status and remaining life. This helps determine battery availability and performance. Other key technologies for lithium battery management systems (BMS): 13. Battery preheating and cooling control: In extreme temperature conditions, the BMS can control the preheating or cooling of the battery to maintain a suitable operating temperature range and improve battery performance. 14. Cycle life optimization: The BMS can optimize the cycle life of the battery by controlling the depth of charge and discharge, charge rate and temperature to reduce battery loss. 15. Safe Storage and Transportation Modes: The BMS can configure safe storage and transportation modes for the battery to reduce energy loss and maintenance costs when the battery is not in use. 16. Isolation protection: The BMS should be equipped with electrical isolation and data isolation functions to ensure the stability of the battery system and information security. 17. Self-diagnostics and self-calibration: The BMS can perform self-diagnostics and self-calibration periodically to ensure its performance and accuracy. 18. Status reports and notifications: The BMS can generate real-time status reports and notifications for operators and maintenance personnel to understand battery status and performance. 19. Data analytics and big data applications: The BMS can use large amounts of data for battery performance analysis, predictive maintenance and optimization of battery operation strategies. 20. Software Updates and Upgrades: The BMS needs to support software updates and upgrades to keep pace with changing battery technology and application requirements. 21. Multi-battery system management: For multi-battery systems, such as multiple battery packs in an electric vehicle, the BMS needs to coordinate the management of the status and performance of multiple battery cells. 22. Safety certification and compliance: BMS needs to comply with various international and regional safety standards and regulations to ensure battery safety and compliance.
Post time: May-08-2024